成員

徐業良 教授

  • 學歷
    National Taiwan University, Mechanical Engineering, BS, 1981/09 - 1985/06
    Stanford University, Mechanical Engineering, Design Division, MS, 1987/09 - 1988/06
    Stanford University, Mechanical Engineering, Design Division, PhD, 1989/07 - 1992/06
    經歷
    Academic Experience
    Editor-in-Chief, Gerontechnology (official journal of International Society for Gerontechnology), 2016/09 - present
    IT Director, International Society for Gerontechnology, 2014/06 - present
    President, International Society of Gerontechnology, Sinophone Chapter, 2014/06 - present
    Editor-in-Chief, Journal of Gerontechnology and Service Management (in Chinese), 2012/12 - present
    Co-Director, Italian Design Summer School, University of Bologna, 2010/02 - present
    Director, Gerontechnology Research Center, Yuan Ze University, 2003/01 - present
    Professor, Department of Mechanical Engineering, Yuan Ze University, 2001/02 - present
    President, Chinese Society of Gerontechnology and Service Management, 2013/01 - 2016/12
    Vice President, International Society for Gerontechnology, 2014/06 - 2016/09
    Associate Editor, Gerontechnology (official journal of International Society for Gerontechnology), 2011/08 - 2016/09
    Chair, the 9th World Conference of Gerontechnology, 2014/06
    Executive Board, International Society of Gerontechnology, 2012/06 - 2014/06
    Dean of Academic Affairs, Yuan Ze University, 2011/08 - 2012/07
    Secretary General, Chinese Society of Gerontechnology and Service Management, 2010/01 - 2012/12
    Secretary General, Yuan Ze University, 2005/08 - 2011/07
    Member of the Presidential Search Committee of Yuan Ze University, 2005
    Director, Office of Physical Education, Yuan Ze University, 2002/08 - 2005/07
    Chairman, Department of Resource and Environment Science Technology, Yuan Ze University, 2002/08 - 2005/07
    Chairman, Department of Mechanical Engineering, Yuan Ze University, 1999/08 - 2005/07
    Dean, Office of Information Services, Yuan Ze University, 1997/08 - 1999/07
    Associate Dean, Office of Information Services, and Head Librarian, Yuan Ze University, 1996/08 - 1997/07
    Director, Center of Teaching and Learning, Office of Academic Affairs, Yuan Ze University, 1995/08 - 1996/07
    Chief, Curriculum Section, Office of Academic Affairs, Yuan Ze University, 1994/08 - 1995/07
    Chief, International Cooperation Section, Office of Research and Development, Yuan Ze University, 1993/10 - 1994/07
    Associate Professor, Department of Mechanical Engineering, Yuan Ze University, 1992/08 - 2001/02

    Industrial Experience
    CEO, Seda G-Tech Co., Ltd, 2016/04 - present
    Director（董事）, Y. Z. Hsu Medical Foundation 2014/07 – 2018/06
    Columnist, Car Magazine（汽車購買指南）, 1995/06-2017/07
    Inspector（監察人）, Smart Care Inc., 2009/09-2011/11
    Director（董事）, TacBright Optronics Co., 2010/09-2011/07
    Director（董事）, Asia Cement Co., Ltd., 2002/06-2005/06
    研究專長
    Innovative product design, Gerontechnology

    1. 白麗, 鄭家凱, 林恩如, 陳思宇, 張譯云, 徐業良, 華碩電腦智慧機器人產品企劃團隊 (2018). 陪伴型機器人使用者經驗評估─ 以智慧居家機器人 Zenbo 為例. 福祉科技與服務管理學刊, 6(3), 265-282. PDF

    2. 徐業良, & 白麗 (2018). 智慧科技於高齡者生活與照護應用之前瞻發展建議. 福祉科技與服務管理學刊, 6(3), 325-338. PDF

    3. 徐業良, & 白麗 (2018). Gerontechnology-老人福祉科技的機會和挑戰. 福祉科技與服務管理學刊, 6(1), 89-104. PDF

    4. 徐業良, & 白麗 (2018). 充分應用智慧科技面對高齡社會挑戰. 福祉科技與服務管理學刊, 6(1), 75-80. PDF

    5. Hsu, Y. L. (2016). A Chinese response to the aging society. Gerontechnology, 14(4), 187-190. PDF

    6. Hsu, Y. L. (2015). Smart Technology for the Older Adults to Facilitate Independent Living and Social Participation. International Journal of Automation and Smart Technology, 5 (4), 195-196. PDF

    7. Lu, J. M., & Hsu, Y. L. (2015). The use of psychophysiological methods in the evaluation of mental commitment robots for elderly care. Journal of Industrial and Production Engineering, 32(7), 449-456. PDF

    8. Liu, Y. W., Hsu, Y. L., & Chang, W. Y. (2015). Development of a bed-centered telehealth system based on a motion-sensing mattress. Journal of Clinical Gerontology and Geriatrics, 6(1), 1-8. PDF

    9. Hsu, Y. L., Jiang, Y. F., Lin, C. H., Lai, T. Y., & Chang, C. L. (2015). Analysis of Personal Life Patterns Using Accelerometer-Based Wearable Devices. International Journal of Automation and Smart Technology, 5(4), 243-248. PDF

    10. 徐業良, & 黃于珍 (2014). 善用資通訊科技協助高齡者照護－從遠距居家照護到溝通與關懷. 公共治理季刊, 2(2), 58-68. PDF

    11. 徐業良 (2014). 海峽兩岸應對老齡社會之研究共識論壇. 福祉科技與服務管理學刊, 2(2). PDF

    12. 徐業良 (2014). 第九屆國際老人福祉科技學會世界年會在台灣. 福祉科技與服務管理學刊, 2(1). PDF

    13. 徐業良 (2014). 老人福祉科技產業的機會和挑戰. 福祉科技與服務管理學刊, 2(1). PDF

    14. Su, R. H., Hsu, Y. L., Chan, L., Lin, H., & Yang, C. C. (2014). Assessing abnormal gaits of Parkinson’s disease patients using a wearable motion detector. Biomedical Engineering: Applications, Basis and Communications, 26(2). PDF

    15. Lin, H., Hsu, Y. L., Hsu, M. S., & Cheng, C. M. (2014). Development of a telehealthcare decision support system for patients discharged from hospital. Telemedicine and e-Health, 20(8), 748-756. PDF

    16. Lin, H., Hsu, Y. L., Hsu, M. S., & Cheng, C. M. (2013). Development and practice of a Telehealthcare Expert System - TES. Telemedicine and e-Health,19(7), 549-556. PDF

    17. Chen, Y. S., Hsu, Y. L., & Lu, J. M. (2013). TRiCmini – telepresence robot for interpersonal communication for older adults. Journal of the Chinese Society of Mechanical Engineers, 34(2), 121-127. PDF

    18. 黃于珍, & 徐業良 (2013). 以社群網路為基礎建構個人化遠距居家照護系統. 福祉科技與服務管理學刊, 1(2), 72-81. PDF

    19. Hsu, P. E., Hsu, Y. L, Lu, J. M., & Chang, C. H. (2013). Seat adjustment design of the intelligent robotic wheelchair based on the Stewart platform. International Journal of Advanced Robotic Systems, 10, 168. PDF

    20. Hsu, P. E., Hsu, Y. L, Chang, K. W., & Geiser, C. (2012). Mobility assistance design of the intelligent robotic wheelchair. International Journal of Advanced Robotic Systems, 9, 244. PDF

    21. Huang, Y. C., Lin, H. J., Hsu, Y. L., & Lin, J. L. (2012). Using n-gram analysis to cluster heartbeat signals. BMC Medical Informatics and Decision Making, 12, 64. PDF

    22. Yang, C. C., & Hsu, Y. L. (2012). Remote monitoring and assessment of daily activities in the home environment . Journal of Clinical Gerontology and Geriatrics, 3(2), 97-104. PDF

    23. 許博爾, 徐業良, 張程皓, 翁啟軒, & 曾吉宏 (2012). 四軸史都華平台應用於輪椅座椅多自由度調整機構設計. 福祉科技與服務管理學刊, 1(1), 125-132. PDF

    24. Hsu, Y. L. (2012). Implementing peer evaluation to improve students’ participation in oral presentations in a large mechanical design class. Global Journal of Engineering Education, 14(3), 219-224. PDF

    25. Yang, C. C., Hsu, Y. L., Shih, K. S., & Lu, J. M. (2011). Real-time gait cycle parameters recognition using a wearable accelerometry system. Sensors,11(8), 7314-7326. PDF

    26. Yang, C. C., & Hsu, Y. L. (2010). A review of accelerometry-based wearable motion detectors for physical activity Monitoring. Sensors, 10(8), 7772-7778. PDF

    27. Yang, C. C, & Hsu, Y. L. (2009). Development of a rapid prototyping system for custom contoured foam cushion Using the Pressure Mapping Method. Biomedical Engineering, Applications, Basis, and Communications, 21(1), 9-16. PDF

    28. Yang, C. C, & Hsu, Y. L. (2009). Development of a wearable motion detector for tele-monitoring and real-time identification of physical activity. Telemedicine and e-Health, 15(1), 1035-1045. PDF

    29. Hsu, Y. L., Yu, C. C., Wang, Y. T., & Hsu, M. H. (2009). Uniform luminance design of the direct-type backlight unit of liquid crystal displays. Journal of the Chinese Institute of Engineers, 32(5), 717-725. PDF

    30. 徐業良, 許博爾, & 洪永杰 (2009). 結合專利資訊與公理設計之創新設計流程. 品質學報, 16(3), 153-163. PDF

    31. Cheng, C. M., Hsu, Y. L., & Young, C. M. (2008). Development of a portable device for tele-monitoring of physical activities during sleep. Telemedicine and e-Health, 14(10), 1044-1056. PDF

    32. Cheng, C. M., Hsu, Y. L., Young, C. M., & Wu, C. H (2008). Development of a portable device for tele-monitoring of snoring and OSAS symptoms. Telemedicine and e-Health, 14(1), 55-68. PDF

    33. Tsai, T. C., Hsu, Y. L., Ma, A. I., King, T., & Wu, C. H. (2007). Developing a telepresence robot for interpersonal communication with the elderly in a home environment. Telemedicine and e-Health, 13(4), 407-424. PDF

    34. Hsu, Y. L., Yang, C. C., Tsai, T. C., Cheng, C. M., & Wu, C. H. (2007). Development of a decentralized home telehealth monitoring system. Telemedicine and e-Health, 13(1), 69-78. PDF

    35. Hsu, Y. L., & Liu, T. C. (2007). Developing a fuzzy proportional-derivative controller optimization engine for engineering design optimization problems. Engineering Optimization, 39(6), 679-700. PDF

    36. Hsu, Y. L., Yu, C. C., Wu, S. C., & Hsu, M. H. (2007). Developing an automated design modification system for aluminum disk wheels. Proceedings of the I MECH E Part B Journal of Engineering Manufacture, 221(3), 447-456. PDF

    37. Tsai, T. C., & Hsu, Y. L. (2007). Development of a parallel surgical robot with automatic bone drilling cariage for sterotactic neurosurgery. Biomedical Engineering, Applications, Basis, and Communications, 19(4), 269-277. PDF

    38. Hung, Y. C., & Hsu, Y. L. (2007). An integrated process for designing around existing patents through TRIZ. Proceedings of the I MECH E Part B Journal of Engineering Manufacture, 221(1), 109-122. PDF

    39. Hsu, Y. L., & Yu, C. C. (2006). Computer simulation of casting process of aluminum wheels. Proceedings of the I MECH E Part B Journal of Engineering Manufacture, 220(2), 203-211. PDF

    40. Hsu, Y. L., Hung, Y. C., & Yin, J. Z. (2006). Design of a novel total knee prosthesis using TRIZ. Journal of Medical and Biological Engineering, 26(4), 177-185. PDF

    41. 鄭智銘, 張琳, 馬鴻祥, 徐業良 & 吳昌暉 (2006). 分散式儲存架構下的遠距環境監測系統之建構：以故宮博物院外展環境監測為例. 博物館學季刊, 20(2), 97-107. PDF

    42. Hsu, Y. L., Liu, T. C., & Liu, Tso-Lung (2005). A fuzzy proportional derivative controller for engineering optimization problems using optimality criteria approach. Engineering Optimization, 37(6), 649-661. PDF

    43. Hsu, M. H., & Hsu, Y. L. (2005). Interpreting three-dimensional structural topology optimization result. Computers and Structures, 83(4-5), 327-337. PDF

    44. Wang, S. G., & Hsu, Y. L. (2005). One-pass milling machining parameter optimization to achieve mirror surface roughness. Proceedings of the I MECH E Part B Journal of Engineering Manufacture, 219(1), 177-181. PDF

    45. Hsu, Y. L., Chen, M. C., Cheng, C. M., & Wu, C. H. (2005). Development of a portable device for home monitoring of snoring. Journal of Biomedical Engineering - Applications, Basis & Communications, 17(4), 176-180. PDF

    46. Hsu, M. H., & Hsu, Y. L. (2005). Generalization of two- and three-dimensional structural topology optimization. Engineering Optimization, 37(1), 83-102. PDF

    47. Hsu Y. L., Liu T. C., Thibault F., & Lanctot B. (2004). Design optimization of the blow moulding process using fuzzy optimization algorithm. Proceedings of the I MECH E Part B Journal of Engineering Manufacture, 218(2), 197-212. PDF

    48. Hsu, Y. L., Huang, C. C., Yo, C. Y., Chen, C. J., & Lien, C. M. (2004). Comfort evaluation of hearing protection. International Journal of Industrial Ergonomics, 33(6), 543-551. PDF

    49. Tsai, C. C., & Hsu, Y. L. (2004). Development of a telepresence agent. Asian Journal of Information Technology, 3(1), 27-34. PDF

    50. Hsu, Y. L., Hsu, M. H., Wang, S. G., & Liu, T. C. (2004). Prediction of fatigue failures of aluminum disc wheels using the failure probability contour based on historical test data. Journal of the Chinese Institute of Industrial Engineers, 2(6), 551-558. PDF

    51. Hsu, Y. L., Wang, S. G., & Yu, C. C. (2003). A sequential approximation method using neural networks for engineering design optimization problems. Engineering Optimization, 35(5), 489-511. PDF

    52. Hsu, Y. L., Wang, C. F., Lien, C. M., & Kao, C. Y. (2003). Design and comfort evaluation of a novel locomotion device for training overhead traveling crane operators in a virtual environment. Journal of the Chinese Institute of the Industrial Engineers, 20(1), 62-70. PDF

    53. Hsu, Y. L., & Yo, C. Y. (2003). The problem-solving approach for the fundamental hands-on practice courses in mechanical engineering education. Journal of Chinese Society of Mechanical Engineers, 24(5), 517-524. PDF

    54. Hsu, Y. L., Hsu, Y. C., & Hsu, M. H. (2002). Shape optimal design of contact springs of electronic connectors. Transactions of the ASME, Journal of Electronic Packaging, 124(3), 178-183. PDF

    55. Hsu, Y. L, & Wang, S. G (2002). Minimizing angular backlash of a multi-stage gear train. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 216(4), 565-569. PDF

    56. Hsu, Y. L., Lee, S. T., & Lin, H. W. (2001). A modular mechatronic system for automatic bone drilling. Biomedical Engineering, Applications, Basis, and Communications, 13(4), 168-174. PDF

    57. Hsu, Y. L., Lee, S. T., & Lin, H. W. (2001). Development of a parallel surgical robot with automatic bone drilling carriage for stereotactic neurosurgery. Biomedical Engineering, Applications, Basis, and Communications, 13(4), 168-174. PDF

    58. Hsu, Y. L., Dong, Y. H., & Hsu, M. H. (2001). A sequential approximation method using neural networks for nonlinear discrete variable optimization with implicit constraints. JSME International Journal, Series C, 44(1), 103-112. PDF

    59. Hsu, Y. L, & Hsu, M. H. (2001). Weight reduction of aluminum disc wheels under fatigue constraints. Computers in Industry, 46(2), 61-73. PDF

    60. Hsu, Y. L., Hsu, M. H., & Chen, C. T. (2001). Interpreting results from topology optimization using density contours. Computers & Structures, 79(10), 1049-1057. PDF

    61. Hsu, Y. L., Tai, C. Y., & Chen, T. C. (2000). Improving thermal properties of industrial safety helmets. International Journal of Industrial Ergonomics,26(1), 109-117. PDF

    62. Hsu, Y. L. (2000). A design process model based on product states. Journal of the Chinese Society of Mechanical Engineers, 21(4), 369-377. PDF

    63. Hsu, Y. L. (1998). Teaching mechanical design to a large class: a report from Taiwan. Journal of Engineering Education, 87(1), 47-51. PDF

    64. Hsu, Y. L., & Wilde, D. J. (1997). Notes on Monotonicity Principles. Transactions of the ASME, Journal of Mechanical Design, 119(2), 153-332. PDF

    65. Hsu, Y. L., Sheppard, S. D., & Wilde, D. J. (1996). The explicit approximation method for design optimization with implicit constraints. Engineering Optimization, 27(1), 21-42. PDF

    66. Chu. P. Y., Hsu, Y. L., & Fehling, M. (1996). A decision support system for project portfolio ion. Computers in Industry, 32(2), 141-149. PDF

    67. Lee, H. J., Lin, M. C., Hsu, Y. L., & Soon, K. K. (1996). Optimal shape design of engine connecting rod with special lumping mass constraint. JSME International Journal, Series C, 39(3), 597-605. PDF

    68. Hsu, Y. L., Guo, Y. S., & Sun, T. L. (1996). Skeleton curvature function method for two dimensional shape optimization under stress constraints. Journal of the Chinese Society of Mechanical Engineers, 17(4), 405-411. PDF

    69. Hsu, Y. L., Sheppard, S. D., & Wilde, D. J. (1995). The curvature function method for two-dimensional shape optimization under stress constraints. Computers and Structures, 55(4), 647-657. PDF

    70. Hsu, Y. L. (1994). A review of structural shape optimization. Computers in Industry, 25(1), 3-13. PDF

    71. Hsu, Y. L., Steele, C. R., & Sheppard, S. D. (1994). Fully stressed thickness profile design at discontinuities of axisymmetric shells. Structural Optimization, 7(3), 119-205. PDF

    72. Hsu, Y. L. (1994). The curvature function method for optimal thickness profile design at discontinuities of axisymmetric shells. The Chinese Journal of Mechanics, 10(1), 11-19. PDF

     

  • International conference papers

    1. Chiapin Wang, Jen-Hau Chan, Shih-Hau Fang, Ho-Ti Cheng, Yeh-Liang Hsu (2019). Novel Sleep Apnea Detection Based on UWB Artificial Intelligence Mattress. 2019 IEEE International Conference on Artificial Intelligence Circuits and Systems (AICAS) PDF

    2. Chiapin Wang, Tsung-Yi Fan Chiang, Shih-Hau Fang, Chieh-Ju Li, Yeh-Liang Hsu (2019). Machine Learning Based Sleep-Status Discrimination Using a Motion Sensing Mattress. 2019 IEEE International Conference on Artificial Intelligence Circuits and Systems (AICAS) PDF

  • Patents

    1. Yeh-Liang Hsu, Wei-Kuan Wang, Kai-Wei Chang, Yu-Wei Liu, Wei-Yi Chang, “Motion-sensing floor mat, motion-sensing floor mat assembly, and monitoring system with the same floor mats,” US10490052B2, 2019/11 PDF

    2. 徐業良, 鄭家凱, 張凱維, 吳竹右, 張譯云, 林恩如, “配對遊戲軟墊、配對遊戲系統及其配對遊戲連線方法,” 中華民國專利發明第I673091號, 2019/10 PDF

    3. 徐業良, 張凱維, 李杰儒, 吳竹右, 陳炳堯, “具有軟性壓力感應功能的布套,” 中華民國專利發明第I664407號, 2019/10 PDF

    4. 徐業良, 王為寬, 劉育瑋, 張凱維, 戴志穎, 張喨逢, 李杰儒, “床墊裝置以及照護系統,” 中華民國專利發明第I611801號, 2019/04 PDF

    5. Yeh-Liang Hsu, Wei Kuan Wang, Yu Wei Liu, Kai-Wei Chang, Chih Yin Tai, Liang Fong Chang, Chieh Ru Li, “Mattress device and care system,” JP6479075, 2019/04 PDF

    6. 徐業良, 陳意欣, 王竹安, 林怡錦, “結合行動裝置之多元人際互動溝通遠端臨場機器人系統,” 中華民國專利發明第I615773號, 2018/02 PDF

    7. 徐業良, 鄭家凱, 陳柏愷, 林季儒, “風車玩具,” 中華民國專利發明第I611829號, 2018/01 PDF

    8. 徐業良, 張凱維, 許力昇, 戴志穎, 蔡森裕, 李杰儒, 黃教晏, 謝坤庭, “應用於室內環境的緊急呼叫裝置、發光系統及其發光方法,” 中華民國專利發明第I607672號, 2017/12 PDF

    9. 徐業良, 王為寬, 林秀珠, 張凱維, 戴志穎, 謝坤庭, “坐墊裝置,” 中華民國專利新型第M539860號, 2017/10 PDF

    10. 徐業良, 戴志穎, Jeffrey Sebastian Reyes Melgar, 李杰儒, 許力昇, “互動式喇叭裝置及系統,” 中華民國專利發明第I599215號, 2017/10 PDF

    11. Yeh-Liang Hsu, Wei Kuan Wang, Kai-Wei Chang, Yu-Wei Liu, Wei-Yi Chang, “Monitoring system,” JP6110429B2, 2017/04 PDF

    12. 徐業良, 戴志穎, 蔡森裕, 陳柏愷, 謝孟桓, “區域定位系統,” 中華民國專利發明第I564847號, 2017/01 PDF

    13. 徐業良, 王為寬, 張凱維, 鄭家凱, 劉育瑋, 許力昇, 莊宗霖, “遊戲軟墊、互動遊戲系統及其互動遊戲連線方法,” 中華民國專利發明第I544952號, 2016/12 PDF

    14. 徐業良, 王為寬, 張凱維, 劉育瑋, 張維益, 戴志穎, 陳純弘, 林致緯, 黃文成, 李杰儒, 潘冠宇, “具有發光功能之感測床、感測床系統及其感測方法,” 中華民國專利發明第I536936號, 2016/06 PDF

    15. 徐業良, 王為寬, 張凱維, 劉育瑋, 張維益, “活動感知地墊及其總成,” 中華民國專利發明第I519702號, 2016/01 PDF

    16. 徐業良, 王為寬, 張凱維, 劉育瑋, 張維益, “活動感知地墊之監視系統,” 中華民國專利發明第I511094號, 2015/12 PDF

    17. Yeh-Liang Hsu, Po-Er Hsu, Cheng-Hao Chang, “Movement Device Having a Stewart Platform,” US9198813B2, 2015/12 PDF

    18. 徐業良, 陳意欣, 王竹安, 林怡錦, 張程皓, “遠距居家照護之遠端臨場機器人於多元人際互動溝通系統,” 中華民國專利發明第I503099號, 2015/10 PDF

    19. Yeh-Liang Hsu, Ju-An Wang, Po-Er Hsu, “Navigation environment establishing method for an intelligent moving-assistance apparatus,” US9014872B2, 2015/04 PDF

    20. 徐業良, 王竹安, 許博爾, “導航環境之設置方法,” 中華民國專利發明第I474294號, 2015/02 PDF

    21. 徐業良, 陳意欣, 陳延暐, 王竹安, “具關懷快遞功能之遠距居家照護系統及其方法,” 中華民國專利發明第I474276號, 2015/02 PDF

    22. 徐業良, 余家杰, 甘凱文, “分散式遠距居家照護系統及方法,” 中華民國專利發明第I473594號, 2015/02 PDF

    23. Yeh-Liang Hsu, Yu-Wei Liu, Ke-Yuan Wu, “非察知式活動檢知裝置,” 日本專利發明第JP548086B2, 2014/02 PDF

    24. Yeh-Liang Hsu, Chih-Ming Cheng, “Remote sleep quality detecting method,” US8905929B2, 2014/01 PDF

    25. 楊弘仁, 許明信, 鄭智銘, 徐業良, 林翰俊, “遠距照護系統及其方法,” 中華民國專利發明第I417080號, 2013/12 PDF

    26. 楊弘仁, 許明信, 鄭智銘, 徐業良, 林翰俊, “健康照護服務系統,” 中華民國專利發明第I417803號, 2013/12 PDF

    27. 徐業良, 許博爾, 涂超恒, “智慧型機器人輪椅,” 中華民國專利發明第I415597號, 2013/11 PDF

    28. 徐業良, 許博爾, 涂超恒, “智慧型機器人輪椅之史都華平台座椅機構及其控制方法,” 中華民國專利發明第I401070號, 2013/07 PDF

    29. Yeh-Liang Hsu, Chih-Ming Cheng, “Remote sleepqualitydetectingsystemandmethodthereof,” US8353828B2, 2013/01 PDF

    30. 徐業良, 吳昌暉, 鄭智銘, 馬鴻祥, 阮致維, “睡眠品質監測系統及生理訊號監測流程方法,” 中華民國專利發明第I374022號, 2012/10 PDF

    31. Yeh-Liang Hsu, Chang-Huei Wu, Chih-Ming Cheng, Hung-Hsiang Ma, “Portable tele-homecare monitoring system and method for the same,” US8111817, 2012/02 PDF

    32. 徐業良, 鄭智銘, “遠端睡眠品質偵測系統及其方法,” 中華民國專利發明第I355260號, 2012/01 PDF

    33. 徐業良, 吳昌暉, 謝佩均, 蔡宗成, “行動式遠端監控系統及其方法,” 中華民國專利發明第I318064號, 2009/12 PDF

    34. 徐業良, 吳昌暉, 鄭智銘, 馬鴻祥, “可攜式遠距居家監測系統及方法,” 中華民國專利發明第I312673號, 2009/08 PDF

    35. 徐業良, 吳昌暉, 鄭智銘, 馬鴻祥, 林志麟, “分散式資料伺服器及其運作方法,” 中華民國專利發明第I309785號, 2009/05 PDF

    36. 徐業良, 吳昌暉, 鄭智銘, 馬鴻祥, 林志麟, “可攜式環境監測系統及其方法,” 中華民國專利發明第I308642號, 2009/04 PDF

    37. 徐業良, 吳昌暉, 鄭智銘, 馬鴻祥, “多重生理監測墊、多重生理監測系統及生理辨識流程方法,” 中華民國專利發明第I299260號, 2008/08 PDF

    38. 徐業良, 吳昌暉, 楊哲彰, 馬鴻祥, “可攜式行為監測系統及其方法,” 中華民國專利發明第I296786號, 2008/05 PDF

    39. 徐業良, 吳昌暉, 鄭智銘, 馬鴻祥, 甘凱文, “可攜式遠距居家生理訊號監測系統,” 中華民國專利發明第I287976號, 2007/10 PDF

    40. 徐業良, 吳昌暉, 鄭智銘, 馬鴻祥, 林志麟, “可攜式遠距居家生理訊號監測系統,” 中華民國專利發明第I286714號, 2007/09 PDF

    41. 徐業良, 吳昌暉, 陳明周, 鄭智銘, “鼾聲感測裝置,” 中華民國專利發明第M268002號, 2005/06 PDF

    42. 劉華昌, 徐業良, 呂東武, 尹居中, “人工膝關節機構改良,” 中華民國專利發明第547069號, 2003/08 PDF

    43. 劉華昌, 徐業良, 呂東武, 尹居中, “人工膝關節半月板與脛骨托盤組合結構,” 中華民國專利發明第547070號, 2003/08 PDF

    44. 徐業良, 李石增, 王崇飛, 陳嘉文, 林浩瑋, 黃宗正, “一種手術用自動骨骼鑽孔裝置,” 中華民國專利發明第493980號, 2002/07 PDF

    45. Yeh-Liang Hsu, Shih-Tseng Lee, Chong-Fai Wang, Jia-Wen Chen, Hao-Wei Lin, Tsung-Cheng Huang, “Automatic bone drilling apparatus for surgery operation,” US6336931, 2002/01 PDF

    46. 徐業良, 鍾含智, 江國華, 鄧振耀, “改良型手扶步行輔助裝置,” 中華民國專利發明第384694號, 2000/03 PDF

    47. 戴基福, 吳世雄, 高崇洋, 徐業良, “兩用安全帽,” 中華民國專利發明第359093號, 1999/05 PDF

    48. Shih-Hsiung Wu, Chung-Yun Gau, Yeh-Liang Hsu, Huoy-Shyi Tsay, “Industrial safety helmet,” US5774900A, 1998/07 PDF

    49. Shih-Hsiung Wu, Chung-Yun Gau, Yeh-Liang Hsu, Huoy-Shyi Tsay, “Industrial safety helmet,” EP 0815754 B1, 1998/07 PDF

    50. 徐業良, 王崇飛, 戴其宇, 涂錦紹, 李福祥, 李明義, 鄭智仁, “結合虛擬實境技術之自行車訓練測試機,” 中華民國專利發明第324227號, 1998/01 PDF

    51. 徐業良, 呂理煌, 王興國, 陳釧棠, 陳廷欽, 葉佳榮, 吳旗泰, 夏弘智, 蔡金城, 王崇飛, “羽毛球發球機,” 中華民國專利發明第324239號, 1998/01 PDF

    52. 李明義, 徐業良, 戴其宇, 王崇飛, 陳聖夫, “折疊式多功能站坐兩用輪椅,” 中華民國專利發明第319072號, 1997/11 PDF

    53. 徐業良, 陳如煌, 呂理煌, 郭雨水, 王興國, 戴其宇, “電動式圖書館還書歸架車,” 中華民國專利發明第309917號, 1997/07 PDF

    54. 吳世雄, 高崇洋, 徐業良, 蔡慧駿, “工地用安全帽,” 中華民國專利發明第283868號, 1996/08 PDF

     

    Books

    1. 徐業良主編(2018)，智慧科技於高齡者照護之前瞻發展與應用，遠東白皮書系列

    2. 徐業良(2015)，機械設計，滄海圖書股份有限公司二版

    3. Lu, J. M., & Hsu, Y. L. (2015). Telepresence robots for medical and homecare applications. Contemporary Issues in Systems Science and Engineering; Zhou, M., Li, H.-X., Weijnen, M., Eds, 725-735.

    4. 盧俊銘，徐業良(2010)，通用設計，銀髮族輔助科技應用手冊第六章，中華民國老人福祉協會

    5. 徐業良，盧俊銘(2012)，老人福祉科技與遠距居家照護技術，滄海圖書股份有限公司二版

    6. 徐業良(2008)，老人福祉科技與遠距居家照護技術，滄海圖書股份有限公司初版

    7. 徐業良(2007)，機械設計，滄海圖書股份有限公司初版。

    8. 徐業良(1997)，機械設計，全華科技圖書股份有限公司出版

    9. 徐業良(1995)，工程最佳化設計，國立編譯館主編，宏明書局印行，華泰書局總經銷

  •  

    1. 2017 YZ Hsu Yuan Ze Chair Professor

    2. 2016 Yuan Ze University Award of Excellence in Research

    3. 2012 Taiwan Telecare Outstanding Contribution Award

    4. 2012 YZ Hsu Yuan Ze Chair Professor

    5. 2010 Yuan Ze University Innovation in Teaching Award

    6. 2007 YZ Hsu Yuan Ze Chair Professor

    7. Hiwin Thesis Award, 2006 Excellence Award

    8. 2005 YZ Hsu Outstanding Professor Award

    9. 2004 Yuan Ze University Award of Excellence in Research

    10. 2001 Yuan Ze University Award of Excellence in Research

    11. 1995 Yuan Ze University Award of Excellence in Teaching

     

     

Back to Top