成員

余念一 副教授

  • 學歷
    1992 Ph.D. The University of California, San Diego

    1988 M.S. The Ohio State University

    1984 B.S. National Taiwan University
    經歷
    2002–present
    Associate Professor
    Department of Mechanical Engineering
    Yuan Ze University

    1998–2002
    Associate Professor

    1993–1998
    Assistant Professor
    Department of Mechanical
    Aerospace, and Biomedical Engineering
    The University of Tennessee, Knoxville
    研究專長
    奈米複合材料力學、微觀力學、薄膜失效模式

  • 國際期刊

    1. Yu, N. and Zhang, Z. H. (2012), “Fatigue of carbon nanotube-reinforced composites,” Advanced Materials Research, 446-449, pp. 3128 – 3131.

    2. Yu, N. and Somphone, T. (2009), “The inclusion and inhomogeneity problems of electrostrictive materials with periodic microstructure,” Mechanics of Materials, 41, pp. 975 – 981.

    3. Yu, N., Zhang, Z. H., and He, S. Y. (2008), “Fracture toughness and fatigue life of MWCNT/epoxy composites,” Materials Science and Engineering A, 494, pp. 380 – 384.

    4. Tee, C. C., Yu, N., and Li, H. (2008), “Modelling on the overall heat conductive and convective properties of open-cell graphite foam,” Modelling and Simulation in Materials Science and Engineering, 16, 7, 075006.

    5. Yu, N. and Chang, Y. W. (2008), “Effects of CNT diameter on the uniaxial stress-strain behavior of CNT/epoxy composites,” Journal of Nanomaterials, Article No. 834248.

    6. Yu, N. (1999), “On overall properties of smart piezoelectric composites,” Composites Part B: Engineering, 30, pp. 709-712.

    7. Yu, N. and Liaw, P. K. (1998), “Ceramic-matrix composites: An integrated interdisciplinary curriculum,” Journal of Engineering Education, 87, 5, pp. 539-544.

    8. Zhao, W., Liaw, P. K., and Yu, N. (1998), “Computation of lamina stacking sequence effect on the elastic moduli of a plain-weave Nicalon/SiC laminated ceramic composite with a [0/30/60] lay-up,” Journal of Nuclear Materials, 253, pp. 10-19.

    9. Liaw, P. K. and Yu, N. (1996), “Modeling the micromechanical aspects of composites,” JOM, 48, pp. 43.

    10. Liaw, P. K., Hus, D. K., Yu, N., Miriyala, N., Saini, V., and Jeong, H. (1996), “Investigation of metal and ceramic-matrix composites moduli: Experiment and theory,” Acta Materialia, 44, 5, pp. 2101-2113.

    11. Liaw, P. K., Yu, N., Hus, D. K., Miriyala, N., Saini, V., Snead, L. L., McHargue, C. J. and Lowden, R. A. (1995), “Moduli determination of continuous fiber ceramic composites (CFCCs),” Journal of Nuclear Materials, 219, pp, 93-100.

    12. Nemat-Nasser, S., Yu, N. and Hori, M. (1993), “Solids with periodically distributed cracks,” International Journal of Solids and Structures, 30, 15, pp. 2071-2095.

    13. Nemat-Nasser, S., Yu, N. and Hori, M. (1993), “Bounds and estimates of overall moduli of composites with periodic microstructure,” Mechanics of Materials, 15, 3, pp. 163-181.

  • 國際性會議論文

    1. Han-Ying Hsueh, Chung-Lin Hsieh, and Niann-i YU, "Computer Modeling of the Interface Effects on the Uniaxial Tensile Behavior of MWCNT-reinforced Composites," The 16th Annual International Conference on Composites/Nano Engineering, 2008/07.

    2. Niann-i YU, "Effects of Fiber Interaction and Coating on the Stress Transfer in Composites," International Conference on Computational and Experimental Engineering & Sciences 2008, 2008/03.

    3. Han-Ying Hsueh, Chung-Lin Hsieh, and Niann-i YU, "Computer Modeling of the Interface Effects on the Uniaxial Tensile Behavior of MWCNT-reinforced Composites," The 16th Annual International Conference on Composites/Nano Engineering, 2008/07.

    4. Chang, Y. W., Niann-i YU,"Mechanical properties of MWCNT-reinforced polymeric composites,"Advances in Materials and Processing Technologies, 2006/08.

    5. Z. H. Zhang, S. Y. He, and Niann-i YU,"Fracture and Fatigue of High-Strength Carbon Nanotube-Reinforced Composites,"International Conference on Smart Materials and Nanotechnology in Engineering, 2006/07.

    6. Zheng-Han Zhang, Shih-Ying He, and Niann-i YU,"Fracture Toughness and Fatigue Behavior of MWCNT-Reinforced Epoxy-Matrix Composites,"The 15th Internationaal Conference on Composites/Nano Engineering, 2006/07.

    一般性會議論文

    1. 邱煒翔, 張育銘, 鄒漢澄, 莊佑誠, 章正翰, and Niann-i YU, "奈米碳管強化環氧樹脂複合材料疲勞的缺口效應," 中國機械工程學會第26屆全國學術研討會, 2009/11.

    2. 薛涵穎 and Niann-i YU, "Simulation of interface cracking using XFEM: Implementation," 中國機械工程學會第26屆全國學術研討會, 2009/11.

    3. 莊凱翔, 章正翰, 余念一,"奈米碳管強化環氧樹脂複合材料疲勞的缺口效應,"中國機械工程學會第二十五屆全國學術研討會, pp. C04-12, 2008/11.

    4. 洪佳杰, 黃名懋, 余念一,"固化劑對多壁奈米碳管強化環氧樹脂斷裂韌度的效應,"中國機械工程學會第二十五屆全國學術研討會, pp. C04-11, 2008/11.

    5. 高菁穗, 薛涵穎, 陳俊逸, 余念一,"延伸有限元素法之先導研究,"中國機械工程學會第二十五屆全國學術研討會, pp. C04-10, 2008/11.

    6. 郭廷鑫, 張國恩, 黃杰, 余念一,"奈米碳管管徑對奈米碳管複合材料之熱傳導係數的效應," 中國機械工程學會第二十四屆全國學術研討會論文集, 2007/11.

    7. 陳煜翰, 黃名懋, 梁哲懷, 何施瑩, 余念一,"奈米碳管與碳纖維對環氧樹脂韌化效應的比較," 中國機械工程學會第二十四屆全國學術研討會論文集, 2007/11.

    8. 陳俊宇, 周鈞淳, 章正翰, 余念一,"奈米碳管強化環氧樹脂複合材料疲勞的缺口效應,"中國機械工程學會第二十四屆全國學術研討會, 2007/11.

    9. 謝宗霖, 薛雅云, 莊忠諺, 余念一,"介面對多璧奈米碳管強化複合材料拉伸行為的效應,"中國機械工程學會第二十三屆全國學術研討會, pp.184-189, 2006/11.

    10. 章正翰, 何恭維, 徐大山, 余念一,"多壁奈米碳管強化複合材料之應力振幅-生命週期曲線,"中國機械工程學會第二十三屆全國學術研討會, pp. 179-184, 2006/11.

    11. 何施瑩, 黃品璇, 王盈傑, 余念一,"多璧奈米碳管強化複合材料之破壞韌度,"中國機械工程學會第二十三屆全國學術研討會, pp. 173-178, 2006/11.

    12. 薛雅云, 謝宗霖, 莊忠諺, 余念一,"弱介面對奈米碳管強化複合材料單軸拉伸的效應,"中華民國力學學會第三十屆全國力學會議, 2006/12.

    13. 何恭維, 徐大山, 章正翰, 余念一,"多壁奈米碳管強化複合材料之S-N 曲線,"中華民國力學學會第三十屆全國力學會議, 2006/12.

  • 95年度

    國科會計畫

    計畫編號

    計畫名稱

    主持人

    NSC95-2221-E-155-016

    奈米碳管強化高分子複合材料之微結構與剛度和可靠的定量關係

    余念一

    NSC95-2815-C-155-010-E

    （大專生研究專題）

    多壁奈米碳管強化複合材料的疲勞性質

    余念一

    NSC95-2815-C-155-005-E

    （大專生研究專題）

    介面對多壁奈米碳管強化複合材料接拉伸行為的效應

    余念一
Back to Top